Classic Drop In Trigger Kits

Due to popular demand, I now have two Competition Triggers which are designed for use in divisions that do not allow external modifications (i.e. IDPA - SSP). These triggers will provide a crisp, ultra smooth, shorter reset and lighter trigger pull.

Note: Apex trigger pad installed on Classic trigger kits on request for $90.00 Please call or email for more information.


Classic Trigger Kit

Kit includes:

  • Tuned Trigger Bar w/OEM smooth faced trigger (found in full-sized Glocks, as opposed to serrated trigger in sub-compact models)
  • Tuned 3.5 lb Connector
  • Modified Firing Pin Safety
  • Modified Spring Cups
  • Trigger Spring
  • Firing Pin Safety Spring
  • Firing Pin 4.0 Spring
  • Firing Pin 4.5 Spring
  • Firing Pin 5.0 Spring
  • Trigger Housing with (preset) Adjustable Over-Travel Stop

The Trigger Group comes assembled and ready to install, and because there are no visible modifications made to the trigger, it it can be used for IDPA SSP and USPSA Production.

Item: CTK...............................................$145.00

Priority Mail Shipping................................$8.00

  • Generations 1, 2, and 3 use the same kit.
  • .10mm SF / .45 cal SF models use the same kit as the Gen 4

Buy Generation 3 Classic
Buy Generation 4/SF Classic


Classic-GM Trigger Kit

The Classic-GM Kit comes with a Jager tuned lightened steel striker/firing pin. The Jager firing pin has been modified for the best trigger possible and can reduce the trigger weight up to 4 ounces while adding smoothness and reliability. This kit also comes with adjustable pre-travel capability that will allow you to fine tune the distance of the trigger pull. Disclaimer: When removing pre-travel the individual using this capability must be knowledgeable on how the safeties function and it is their responsibility to keep the safeties working.

Jager Lightened Striker/Firing Pin! This extremely light weight steel firing pin has been "tuned" and is furnished with the GM Trigger Kit. The lighter striker/firing pin is designed to use with reduced power spring, plus the tip has been extended to help eliminate light primer strikes and provide increased reliability. Note: Vanek Custom is not the manufacture of this part. Jager Products will be responsible to repair or replace any defective product.

Kit includes:

  • Tuned Jager Lightened Steel Striker/Firing Pin
  • Tuned Trigger Bar w/OEM smooth faced trigger (found in full-sized Glocks, as opposed to serrated trigger in sub-compact models)
  • Tuned 3.5 lb Connector
  • Modified Firing Pin Safety
  • Trigger Spring
  • Firing Pin Safety Spring
  • Firing Pin Spring 4.0lb
  • Firing Pin Spring 4.5lb
  • Firing Pin Spring 5.0lb
  • Adjustable Pre-Travel Capability
  • Spacer Sleeve
  • Trigger Housing with (preset) Adjustable Over-Travel Stop.

The Trigger Group and Firing Pin Mechanism are pre-assembled and ready to install. No visible modifications are made to the trigger, therefore it can be used for IDPA SSP.

Item: CTK-GM.......................................$235.00

Priority Mail Shipping.............................$8.00

  • Generations 1, 2, and 3 use the same kit.
  • .10mm SF / .45 cal SF models use the same kit as the Gen 4

Low Stock - Jager 9mm/.40/.357 Strikers

Out Of Stock - Jager 10mm/.45 Strikers

Buy Generation 3 Classic GM
Buy Generation 4 Classic GM


Use the Trigger Kit Installation links with detailed pictures and step by step instructions for easy installation. The Slide Installation will help when removing and installing the slide parts and the Frame Installation will help when removing and installing the receiver parts.

Note: These Triggers have a pull in the 2 lb. range using a RCBS premium spring scale. The trigger pull range will vary due to inconsistencies between individual Glock's. These kits will vastly improve your trigger action over the factory trigger. Kits are built within tolerances, which will allow them to be interchanged between Glock's of the same frame size.